An answer file serves the following purposes when you are installing the Windows® Small Business Server 2011 Standard server software (Windows SBS 2011 Standard ):
-
Provides information that is automatically entered into the Windows SBS 2011 Standard
installation pages. You can use an answer file for either a new installation or a migration to Windows SBS 2011 Standard
.
-
Helps value-add professionals build new servers before taking them to the customer site for final configuration.
Note If you are migrating from an existing server to Windows SBS 2011 Standard , you must perform all of the installation steps at the customer’s site. Note The Getting Started tasks must be completed at the customer site. -
Triggers the migration process during Windows SBS 2011 Standard
installation.
Note You must use an answer file when you are migrating to Windows SBS 2011 Standard . You can also use an answer file for an unattended installation.
The Answer File Tool performs limited validation on the data in the answer file. Follow the instructions in this document to complete each field and to help the installation finish without validation errors.
An answer file automates the configuration of the Windows SBS 2011 Standard installation in either attended or unattended mode for both a new installation and a migration to Windows SBS 2011 Standard .
-
In a fully unattended installation, the user or technician interacts with the installation only if there is an error in the answer file.
-
In an attended installation, the answer file is used to populate the fields on each configuration page, and then the user or technician verifies the information and can change any field before clicking Next.
| Important |
|---|
To fully automate the installation on a server that has a preinstalled operating system, you must also use the OOBE.xml answer file for the operating system phase of the installation. To fully automate a clean installation on a server, you must use the autounattend.xml answer file. When you use autounattend.xml, you cannot specify a drive letter other than the C drive. Windows SBS 2011 Standard
can be installed successfully only on the C drive. For information about creating an answer file using the Automated Installation Kit (AIK), see the following documentation:
|
To create an answer file, complete the following steps:
-
Collect the information for the answer file (for either an installation or a migration).
-
Run the Answer File Tool.
-
Copy the answer file to the root of a drive on the new server or any removable media.
Step 1A. Collect the information for an automated installation answer file
If you are installing Windows SBS 2011 Standard on multiple servers for different customers in your office before taking the servers to the customer sites, ensure that the DNS name is unique on your local network or that each server is connected to a separate network during the installation. You must also choose names that are unique to the customer site.
The following tables explain the information that you need to enter in the Answer File Tool for a new installation.
Clock and time zone settings
| Information to provide | Description |
|---|---|
|
Clock and time zone settings |
If you choose to manually set the clock and time zone, the unattended installation stops, and then it prompts you to set the clock and time zone. If you choose to automatically set the time zone, you must manually set the clock in the server BIOS to the correct time. The system clock cannot be set automatically using the answer file. |
Server Information
| Information to provide | Description | ||
|---|---|---|---|
|
Server name |
The name of your new server. This must be a unique name on the local network.
|
||
|
Internal domain name |
The NetBIOS name of the internal domain—for example, contoso. This must be a unique name on the local network. The domain name and the server name cannot be the same.
|
||
|
Full DNS name |
The DNS name of the internal (local) domain. You must provide at least two labels for the full DNS name. For example, you can use contoso.local, but contoso alone is not valid. It is recommended that you do not use a public top level domain name, such as .com, as the last label in the full DNS name. This is the DNS name of the internal domain. If you use Apple Macintosh client computers that are running Macintosh OS X 10.2.x or later on your network, see the
|
Company Information
| Information to provide | Description |
|---|---|
|
Company information (optional) |
The name and address of the business. This information is used for settings on your server and is not sent to Microsoft®. You can edit the company information later. To edit it, in the Windows SBS Console, click the Help list menu, and then click Edit Company Information. |
Network administrator account
| Information to provide | Description |
|---|---|
|
Network administrator account |
This is the new administrator account name that is created when you install Windows SBS 2011 Standard . For a new installation, after the server restarts for the final time, you are logged on using this administrator account and password. |
|
First name of the administrator. |
|
Last name of the administrator. |
|
User name or alias for the new network administrator account. The user name must consist of the following:
|
|
Password for the new network administrator account. The password that you provide must be complex. If you do not provide a complex password, the unattended installation stops so you can provide the complex password. A complex password is at least 8 characters long and contains at least three of the following:
|
| Note |
|---|
For a new installation, you can either specify the network settings or allow the installation wizard to configure them for you. If you are installing Windows SBS 2011 Standard on multiple servers in your office before taking them to the customer sites, consider the following:
-
If you specify network settings that are specific to the customer’s network configuration, you may not be able to access the Internet during installation to get updates from your own network.
-
If you specify settings appropriate to your own network, you may need to change them when you deliver the server to the customer site.
If you want to specify the network settings, you need the following information.
Network Settings
| Information to provide | Description |
|---|---|
|
IP address (optional) |
The IP address that you want to assign to your server. Ensure that the IP address is in the same subnet range as the IP address of the local area connection (LAN) on your router and that the IP address is not currently used on the network. If you select the Manually choose the network settings option and do not specify the IP address, the answer file cannot be saved. |
|
Default gateway (optional) |
The IP address that is assigned to the local area connection on your router. |
Step 1B. Collect the information for the migration answer file
The following tables list the migration settings that you must define in the Answer File Tool.
Clock and time zone settings
| Information to provide | Description |
|---|---|
|
Clock and time zone settings |
If you choose to manually set the clock and time zone, the migration stops, and then it prompts you to set the clock and time zone. If you choose to automatically set the time zone, you must manually set the clock in the server BIOS to the correct time. The system clock cannot be set automatically using the answer file. |
Company Information
| Information to provide | Description |
|---|---|
|
Company information (optional) |
The name and address of the business. This information is used for settings on your server and is not sent to Microsoft. You can edit the company information later. To edit it, in the Windows SBS Console, click the Help list menu, and then click Edit Company Information. |
Source (Existing) Server Information
| Information to provide | Description | ||||
|---|---|---|---|---|---|
|
Domain administrator account name |
The user account name of a domain administrator in the existing domain.
|
||||
|
Password |
The password that corresponds to the domain administrator account name.
|
||||
|
Source Server name |
The name of the server from which you are migrating settings and data. |
||||
|
Source domain name |
The full DNS name of your organization's internal domain—for example, contoso.local. |
||||
|
Default gateway |
The IP address that is assigned to the router on your network. |
||||
|
Source Server IP address |
The IP address that is assigned to the Source Server. |
||||
|
DHCP is running on the Source Server |
Select this box if the DHCP service is running on the Source Server. It is recommended that the DHCP service run on the Destination Server. If you are running the DHCP service on the Source Server, it is moved for you during Windows SBS 2011 Standard migration. If the DHCP service is running on another server or device, you must manually disable it on that server or device. |
| Note |
|---|
| The domain administrator user name and password that you supply in the answer file are also set as the Directory Services Restore Mode (DSRM) password. If for any reason you need to log on to the server in DSRM, you must use the same user name and password that you specified during migration. These passwords do not synchronize automatically, so if you change the password for your administrator account on Windows SBS 2011 Standard , you must continue to use the old password to log on to the server in DSRM. |
Destination Server Information
| Information to provide | Description |
|---|---|
|
Destination Server name |
The name of the server to which you are migrating. You will install Windows SBS 2011 Standard on this server. This must be a unique name on the local network. The Destination Server name cannot be the same as the domain name. Also, the Source Server name and the Destination Server name cannot be the same. |
|
Destination Server IP address |
The IP address that you want to assign to the Destination Server. |
Step 2. Run the Answer File Generator
| Note |
|---|
|
To run the Answer File Generator, you must have the Microsoft .NET Framework 2.0 or later installed on the computer that you are using to create the answer file. To install .NET Framework 2.0, see the |
To create an answer file for an automated installation
-
On a client computer or a server, insert the first Windows SBS 2011 Standard DVD, navigate to the Tools folder, and then double-click SBSAfg.exe. The Answer File Generator opens.
-
Click New installation.
-
Type the information that you collected in Step 1A.
-
Save the answer file as sbsanswerfile.xml.
To create a migration answer file
-
On a client computer or a server, insert the first Windows SBS 2011 Standard DVD, navigate to the Tools folder, and then double-click SBSAfg.exe. The Answer File Generator opens.
-
Click Migration from existing server (Join existing domain).
-
Type the information that you collected in Step 1B.
-
Save the answer file as sbsanswerfile.xml.
Step 3. Copy the answer file
Copy the answer file to the root of either a USB flash drive or a USB external hard drive. Connect the USB drive to the new server, or copy the answer file from the USB drive to the root of any drive on the new server. Then start either installing or migrating to Windows SBS 2011 Standard . If the Windows SBS 2011 Standard installation wizard detects a migration answer file, the migration process starts automatically.
| Warning |
|---|
| The answer file contains logon and password information that can be used to gain access to your server. To help protect your server, when you finish installing Windows SBS 2011 Standard , delete the answer file. |
Troubleshooting the answer file
When running an installation (either new or migration) using the Windows SBS 2011 Standard Answer File, you might encounter an error if the server cannot read information in the answer file. This can occur under the following circumstances:
-
The Windows SBS 2011 Standard
Answer File Tool is not formatted correctly.
-
The answer file contains corrupt data.
If you encounter an error when running the answer file, take the following steps to verify the contents of the answer file:
-
If possible, using the Windows SBS 2011 Standard
Answer File Tool, open the answer file.
-
Review the installation information, and then save the file.
Note If you receive an error that the file cannot save, close the file, and then recreate a new answer file with the same information. -
Click Retry. If you did not continue past the Continuing Installation page, you can restart your server to try and read the answer file again.
| Important |
|---|
| You should not open the answer file and edit it directly. Doing so can introduce errors in the file format. |
Other general troubleshooting tips
If you cannot start the installation with the Windows SBS 2011 Standard Answer File, check the following:
-
Make sure that the removable media that contains the answer file is plugged into and is recognized by the server. If the server does not recognize the removable media, try using different removable media.
-
Make sure that the answer file is saved with the file name sbsanswerfile.xml. If an error exists in the file name, rename the file to correct the error, and then restart the server.
-
Make sure that the file sbsanswerfile.xml is located in the root of the removable media that you are using. If it is not, move or copy the file to that location and then restart the installation.
Copyright
Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted in examples herein are fictitious. No association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
Your right to copy this documentation is limited by copyright law and the terms of the software license agreement. As the software licensee, you may make a reasonable number of copies or printouts for your own use. Making unauthorized copies, adaptations, compilations, or derivative works for commercial distribution is prohibited and constitutes a punishable violation of the law.
© 2010 Microsoft Corporation. All rights reserved.
Microsoft, Windows Server, Windows 7, Windows Vista, and Windows are trademarks of the Microsoft group of companies.
All other trademarks are property of their respective owners.